It is the adhesion bridge that is used before the application of the varnish to waterproof and consolidate the microcement. It is a water-based pore filler that provides hardness and homogeneity to the microcement.
It is a product that also allows creating a protective and consolidating film on microcement coatings.
Features:
Concrete Finish WT by Luxury Concrete® is a water-based varnish specifically formulated to protect microcement. It is a perfect sealer to protect the decorative coating and offers matte, satin, or gloss finishes.
The mixture consists of two products: polyurethane (Component A) and catalyst (Component B). The polyurethane Concrete Finish WT is colorless and does not yellow under the action of sunlight. Microcement coatings must be protected with Concrete Finish WT after priming with an acrylic resin.
Features:
Concrete Finish WT Max is another of our high-end two-component polyurethane varnishes and water-based. Its superior chemical and water resistances make it the ideal sealer to protect microcement coatings in damp spaces such as bathrooms.
The excellent performance against abrasion makes it a safe bet in high wear areas. And its non-yellowing under sun exposure, an excellent outdoor water-based varnish. It offers decorative finishes in gloss, satin and matte.
Features:
Concrete Finish One is the new single-component water-based varnish manufactured to enhance the color of the ready-to-use Easycret microcement. It offers a perfect matte or satin finish to beautify the finishes and reinforce the renewed appearance of the surface.
This transparent sealant varnish comes ready to apply directly to the surface, whether indoors or outdoors. Its performance goes beyond aesthetic finishes. It is the perfect product to highlight the textures of the ready-to-use microcement.
It offers excellent adhesion and good chemical and abrasion resistance. Prolonged exposure to the sun will not make it yellow. It is the best ally to complete the application of ready-to-use microcement Easycret on floors and walls. Seven days after its application, it reaches its maximum performance.
Features:
Concrete Finish WT Pool is a water-based sealer formulated with lithium salts, designed for the Concrete Pool microcement pool system. It is characterised by the formation of a protective and consolidating film that helps protect and preserve the original condition of the microcement without compromising its properties.
When applied, it enhances both chemical and mechanical resistance, partly due to its ability to withstand the alkalinity of microcement. It also offers low water absorption while remaining permeable to water vapour.
Application is very straightforward. Beneath its milky-white appearance lies one of the fastest touch-dry times: between 30 and 60 minutes (depending on ambient conditions and temperature at the time of use). Before application, the surface must be thoroughly cleaned. Concrete Finish WT Pool should then be applied in two coats, allowing 24 hours between each layer.
Features:
Concrete Finish Extra is a 100% solid polyurethane sealer with aliphatic properties. A high-performance single-component varnish that provides extreme resistance to sun exposure and also to stains.
Similarly, it provides excellent mechanical performance to pavements that suffer from medium and medium-high traffic. Therefore, it is perfect for spaces such as supermarkets, hospitals, schools, offices or cafeterias.
Its aliphatic character ensures its use outdoors without shocks, as it does not yellow under any circumstances. It offers a quick application, as it is not necessary to prime the support, as well as a drying time of just 4-6 hours between layers. It offers glossy and matte finishes.
Features: